AIR PRECISION
Slip ring assembly
DownloadStandard slip rings
AIR PRECISION, leader in high technology slip rings, extends its range to offer mass produced cost effective products whilst retaining its renowned qualities.
- Reliability
- Long life
- High performance
Through proven technology: precision ball bearings, gold plated rings, gold brushes.
Electrical characteristics
| Term | Specifications |
|---|---|
| Current rating per ring : | 2 A |
| Acceptable over current : | 4 A (<1s) |
| Dielectric strength : | 500 V DC |
| Insulation resistance : | 100 MΩ at 500 V DC |
| Contact noise : | 10 µV/mA |
| Lead wires cross section : | AWG 24 (0,23 mm2) |
| Nominal voltage : | 48 V |
Mechanical characteristics
| Term | Specifications |
|---|---|
| Material : | Thermoplastic |
| Operating speed : | 0 to 150 rpm |
| Service life (for 150 rpm) : | 50.106 rotations |
| Torque : | <= 6N.cm |
| Sealing (according to NFC20-010) : | IP 50 |
| Weight : | <= 100 g |
Climatic environment
| Term | Specifications |
|---|---|
| Operating temperature : | -10°C to +55°C |
| Relative humidity : | 45% to 75% |
Driving on the shaft
Groove for M2,5 screw with dog point (according to NFE 27-110)
Tightening torque < 25 N.cm
Advice when coupling : use an elastic coupling
Mounting arrangement
4 PLASTITE screws (2.5 dia, L = 16 mm) supplied with slip ring suitable for attachment to plate thickness of 1.5 to 3 mm
- To be ordered under reference :
-
- T13SD6F2 for 6 rings
- T13SD12F2 for 12 rings
Mounting arrangement
3 holes at 120° on 41 dia. for screws M3
- To be ordered under reference :
-
- T13SD6F3 for 6 rings
- T13SD12F3 for 12 rings
AIR PRECISION
5, avenue Denis Papin - 92353 LE PLESSIS ROBINSON cedex - France
Tel : +33 (0)1 46 01 21 24
Fax : +33 (0)1 46 31 85 25
© 2003-2006
legal notice